Standard Products

Liivatera offers a small but growing range of Eurorack modules, ranging from simple utilities to complex oscillators and filters. All are designed and manufactured by the company in Estonia. This is an overview of the range, clicking on the module title takes you to a more detailed description of each one.
This VCO uses a triangle-core design with high precision expo performance for excellent tuning accuracy, and the FM capabilities are a particular strength of this module.

Through-Zero Frequency-Modulation.

Wideband FM produces rich, inharmonic tones. Three switchable sensitivity settings offer everything from simple vibrato to complex tones.

Reversing Sync.
The direction of integration in the VCO core can be reversed on the rising, falling and rising & falling edges of a signal for ring-modulator-like effects.

VCO and LFO in a single module.
The frequency of the VCO can be reduced by a factor of 100 with a switch on the front panel.

The module is 14HP wide.
Based on the original through-zero VCO, this module has combined some functions and reduced the sync options to reduce the size of the module.
The same complex modulation capabilities are retained, with improved high-frequency tracking to make the module even better.

The module is available in white, silver and black.

The module is 12HP wide.
Copying the same layout style of the slim VCO, this filter is a 4-pole low-pass filter with a few extra features. The module is designed with linearity and low noise as a priority, with just enough distortion to have a character of its own.
Resonance is voltage-controlled, and a VCA on a second output eliminates the need for an external VCA in minimal systems.

The module is available in white, silver and black.

The module is 12HP wide.
Two independent envelope generators that can be triggered from the gate signal on the power bus, or through sockets on the front panel.
With no input signal each output is a standard control voltage, however with an external signal the output is the input modulated by the envelope.

The module is available in white, silver and black.

The module is 12HP wide.
A fully-featured single-channel MIDI interface. In addition to CV and Gate, the module supports velocity and aftertouch as well as pitchblend and modulation wheels.
MIDI clock is fully supported to synchronise with e.g. sequencers and an arpeggiator is included.

The module is available in white.

The module is 8HP wide.
A digital noise source that sounds analogue.
Five kinds of noise, ranging from blue (high frequencies, 'hissing air') to brown (rumbles, sub-audible).

The module is available in white.

The module is 4HP wide.
Five DC-coupled channels that can be used independently. They scale the input signal gain from -1 to +1 and add a voltage between -5 and +5v. An unconnected output is automatically summed into the next channel down so signals can be summed.
All five outputs are summed into a sixth channel with overall volume control, independent of the use of individual outputs.

The module is available in white, silver and black.

The module is 16HP wide.
Two independent VCA's switchable between linear and exponential response. They can also be combined to create a panner or two-channel mixer.

The module is available in white, silver and black.

The module is 8HP wide.
A combined LFO and sample and hold, the S&H can be clocked by the LFO or an external clock.
The LFO has sine, triangle and square outputs, and the S&H can be switched between sample and tracking mode.

The module is available in white.

The module is 8HP wide.